Outdoor fiber optic installations face constant threats from moisture, temperature swings, and physical stress. Cable failures in these conditions cause network downtime, costly repairs, and data loss. The GJA Waterproof Fiber Optic Cable from singi-cable addresses these challenges with a robust design that maintains signal integrity even in wet, buried, or exposed environments.
Standard fiber optic cables lack adequate protection against water ingress. When moisture seeps into the cable, it can freeze, expand, and damage the fibers. Physical stress from pulling, bending, or rodent activity can also break fibers over time. Utilities, telecom providers, and industrial facilities operating in remote or harsh locations face these issues repeatedly. The result is frequent maintenance, higher operational costs, and unreliable network performance.
singi-cable designed the GJA for outdoor and buried applications. It combines a loose tube structure with water-blocking materials, a steel armor layer, and a robust polyethylene sheath. This cable meets the requirements of IEC 60794-1 and IEC 60794-3 standards for mechanical and environmental performance.
| Feature | Benefit |
|---|---|
| Water-blocking tape and gel | Prevents water penetration along the cable length |
| Steel tape armor | Protects against rodents, crushing, and mechanical stress |
| Loose tube design | Allows fiber movement under temperature changes, reducing attenuation |
| PE outer sheath | UV-resistant and durable for direct burial and aerial use |
| Single-mode or multimode options | Supports distances from local loop to long-haul |
| Parameter | Value |
|---|---|
| Temperature range | -40°C to +70°C |
| Minimum bend radius (static) | 10× cable diameter |
| Water penetration test | Pass per IEC 60794-1-F5 |
| Tensile strength (installation) | 1500 N |
| Attenuation (single-mode @ 1550 nm) | ≤ 0.22 dB/km |
Yes. The steel armor and water-blocking layers make it suitable for direct burial without additional conduit, provided the installation depth meets local codes.
Yes. The GJA can be ordered with both OS2 single-mode and OM3/OM4 multimode fibers to support different distance and bandwidth requirements.
The GJA includes extra water-blocking and a thicker armor than standard loose tube cables, giving it higher crush resistance and waterproofing for extreme conditions.
Pulling length depends on installation method and cable tension., runs of up to 1000 meters are possible with proper pulling grips and lubricants.
Yes. Singi-cable offers custom cut lengths and can pre-terminate connectors upon request. Contact sales for lead times.
The GJA Waterproof Fiber Optic Cable is a cost-effective choice for outdoor fiber networks where moisture and mechanical damage are primary concerns. Its compliance with IEC 60794 standards ensures consistent quality. For network engineers needing a reliable, armored, waterproof cable, the GJA from singi-cable delivers without unnecessary complexity.
References:
IEC 60794-1: Optical fibre cables – Part 1: Generic specification.
IEC 60794-3: Optical fibre cables – Part 3: Outdoor cables.
![Singi Cable[Email: singi100@singi.com]](/u_file/2303/photo/11c1fa1eb8.jpg)
