UL1569 cable is a UL-recognized hook-up wire used for internal wiring of electronic equipment, control panels, and appliances. This article explains its key properties, compares it with similar UL styles, and provides choice criteria for engineers and procurement professionals. Singi Cable supplies UL1569 cable that meets rigorous North American standards.
This article is intended for engineers, project managers, and procurement specialists who need to understand the performance characteristics of UL1569 cable and how to assess suppliers like Singi Cable.
Note: UL1569 is recognized under UL 758 (Appliance Wiring Material). The cable is designed for exposed or protected internal wiring where flexibility and reliable insulation are required.
UL1569 is a single-conductor, PVC-insulated hook-up wire rated for 300 V or 600 V, with a temperature rating of 80°C or 105°C. Its insulation is 30 mils (0.76 mm) thick, providing good mechanical protection and dielectric strength. Common applications include:
Because UL1569 is a UL-listed component, it is accepted by inspection authorities in the United States and Canada for use in end products.
Engineers choose UL1569 cable for several practical reasons:
For these reasons, UL1569 cable is a standard choice for electrical panel builders and appliance manufacturers.
When sourcing UL1569 cable, pay attention to these parameters:
| Parameter | Typical Range | Why It Matters |
|---|---|---|
| Voltage rating | 300 V or 600 V | Must match the circuit voltage; 600 V is common for industrial panels. |
| Temperature rating | 80°C or 105°C | Higher rating needed near heat sources. |
| Conductor size (AWG) | 30 AWG to 2 AWG | Choose based on current load. |
| Insulation thickness | 30 mils (0.76 mm) | Meets UL 758 requirements. |
| Conductor material | Bare or tinned copper | Tinned resists corrosion. |
Always verify the UL listing mark and obtain a UL Certificate of Compliance from the supplier.
UL1569 is compared to UL1007 and UL1015, which are also PVC-insulated hook-up wires. Here’s a quick comparison:
| UL Style | Insulation Thickness | Voltage Rating | Temperature Rating |
|---|---|---|---|
| UL1007 | 15 mils | 300 V | 80°C |
| UL1569 | 30 mils | 300 V or 600 V | 80°C or 105°C |
| UL1015 | 30 mils | 600 V | 105°C |
UL1569 bridges the gap between light-duty (UL1007) and heavy-duty (UL1015) wiring. It offers a higher voltage option than UL1007 while keeping a cost advantage over UL1015 in moderate temperature environments.
Procurement professionals should confirm the following with their supplier:
Singi Cable provides UL1569 cable with traceable quality and complete documentation.
Following good installation practices helps maintain cable integrity:
With proper handling, UL1569 cable can provide decades of reliable service in indoor, dry environments.
Standard UL1569 is rated for 80°C or 105°C. For higher temperatures, consider UL style 1015 or 1430 with higher temperature ratings.
No, UL1569 is not UV-resistant nor rated for wet locations. For outdoor exposure, use a cable with a sunlight-resistant jacket, such as UF or THWN.
It is available in 300 V and 600 V ratings. The 600 V variant is common for industrial control panels.
UL1569 has thicker insulation (30 mils vs. 15 mils) and a higher voltage rating option (300/600 V vs. 300 V), making it suitable for more demanding applications.
For global markets, additional certifications like CE (EN 50525), PSE (JIS C 3306), or CCC may be required. Singi Cable can assist with multi-certification needs.
For reliable UL1569 cable that meets North American standards, consider the range from Singi Cable. Their products are backed by consistent quality control and on-time delivery for OEM and distribution orders.
References
[1] EN 50525-2-11:2011. Electric cables — Low voltage energy cables of rated voltages up to 450/750 V — Part 2-11: Cables for general applications — PVC insulated cables [S].
[2] JIS C 3306:2000. PVC insulated wires (IV wires) [S].
[3] UL 758. Appliance Wiring Material [S]. (Referenced for UL1569 requirements.)
